What do shock pads do

Wheel bite prevention. The bottom of the deck gets gradually closer to the tops of the wheels as you lean into a turn. Lean too far and the wheels can rub on the surface of the deck, acting like brakes. This is called wheel bite. Do not ignore those black marks burned above your wheels. Sooner or later, wheel bite will stop you cold and throw you to the concrete.

Risers increase the space between the wheels and the deck, preventing the board from contacting the wheels in the first place. Allows room for taller wheels. There are many reasons to consider opting for taller wheels. For one, taller wheels cover more ground per rotation than shorter ones. That means more speed and less pushing — all other things being equal. Taller wheels also last longer, as there is more urethane to wear down.

Allows sharper turns. The added space between the board and wheels gives you more room to lean before the board touches the wheels. All vehicles will use a shock or a strut on each of the four corners.

There are 3 main types of shock absorbers: Mono-tube Shock Absorber: The most common type of shock absorber used is a mono-tube or gas shock absorber. This component is made from a steel tube with a rod and piston installed inside. Skateboard riser pads are made of hard plastic and their primary aim is to reduce wheel bite. Shock Pads are made of rubber and designed to reduce shock and vibration for a smoother ride. Unlike riser pads — using shock pads can also reduce your speed.

Rectangular riser pads are the most common shape for skateboarders. As long as you have the money, it's win-win. Better pop, and less decks lasting so long you end up skating soggy-ass decks. I ride teh 8. If you take away some of the pressure you take away some of the power. These are what we call Angled Riser Pads. However, this type of riser pad is generally used for longboards and cruisers.

They change the angle at which your trucks are mounted on the deck, thus altering the steering behaviour of your skateboard. You can learn more about that in our longboard section. If you do choose to skate with shock or riser pads, you should ensure that the bolts in your mounting kit are the appropriate length.

The higher your shock pads, the longer your bolts should be. You can learn how to mount your shock and riser pads in our Skateboard Assembly Instructions.

Vans Wayvee Wear Test — a truly new skate shoe? Le Garage Paris: skatedeluxe Night Recap. General Info 2.